Phone: 07 5529 2544

  • Your enquiry is empty!

MInn Kota
Muir Prices
Lighting
Refrigeration
AV
B-TECH LITHIUM PACKAGES
Bennett
Hella Apelo Underwater Lights
Majestic
B-Tec Lithium
BBQ
Clarion
Electrical
Jabsco Pumps
Solar
Battery Chargers
TV
Topargee
Isotemp Hot Water System
ICOM
Muir Winches
Pumps
Smart TV
Hot Water Heaters
Plastimo Compass
Battery
BBQ_2
Rule Pumps
Hella Navigation Lights
Lonestar
Aus Wide Shipping

Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM with LCD Screen - 4 Stage Charging - Low Battery Protection (SR-EC-30M)

Morningstar
  • Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM with LCD Screen - 4 Stage Charging - Low Battery Protection (SR-EC-30M)

Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM with LCD Screen - 4 Stage Charging - Low Battery Protection (SR-EC-30M)

Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - Suits Wet, Sealed, GEL & AGM Batteries

  • Online Price: $336.00 (including 10 % GST tax)


- OR -

Australia's Best Price on Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems

PWM with LCD Screen - Suits Wet, Sealed, GEL & AGM Batteries (SR-EC-30)

153 x 105 x 55mm

Max 60VOC / 30Amps

overview

Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM with LCD Screen (SR-EC-30M)

  4 Stage Charging - Low Battery Protection

Suits Wet, Sealed, GEL & AGM Batteries

The NEW EcoPulse™ is now available and shipping from our warehouses. The EcoPulse is a pulse width modulation (PWM) solar charge controller within the Morningstar Essential Series™ which provides essential off-grid battery regulation functions. This controller is easy to use and was developed for residential and leisure consumer applications. Metered and non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24 volt battery systems. This controller is not sold in the USA or Canada.

Features:

  • High Reliability – conformally coated circuit board and corrosion resistant terminals.
  • Robust Thermal Design – extruded aluminum heatsink dissipates heat quickly without using cooling fans.
  • Durable Casing – high strength polycarbonate case.
  • LED Fault Indications – alert when short circuit, over current, high voltage, and other error conditions take place.
  • Automatic Solar Based Lighting Control – field adjustable dusk ‘til dawn setting.
  • Adjustable Charge Settings – seven presets and a custom setting can be set via DIP Switches or by the meter display buttons.
  • Adjustable Load Control – load control can be adjusted via meter display.
  • Optional Meter – multi-lingual interface with scroll buttons to adjust the settings and display metrics.

Downloads:

Options:

  • Remote Temperature Sensor (RTS)

specification

Normal Specification SR-EC-10 SR-EC-20 SR-EC-30
Electrical
Nominal Battery Voltage 12V or 24V auto-detect
Battery Voltage Range 10-35V
Voltage Accuracy <= 0.1% +/- 50mV
Maximum Battery Current 10A, 20A or 30A
Maximum PV open-circuit voltage 60V
Load Current Rating 10A, 20A or 30A
Self-Consumption <15mA; <20mA (meter)
LED Indications (1) status, (3) Battery state of charge
Transient Surge Protection 1500 Watts (solar, battery, load)
Environmental
Operating Temperature -40°C to + 45°C
Storage Temperature -40°C to + 80°C
Humidity 100% non-condensing
Tropicalization conformal coating, marine-rated terminals
Mechanical
Dimensions (W x L x D)

15.3 x 10.5 x 5.5 cm (6.0 x 4.1 x 2.2 in)
Weight 0.4 kg / 1.0 lbs
Wire Size Range

Power Terminals: 2.5 – 16 mm2 / 14 – 6 AWG

Battery/Temp. Sense: 0.25 – 1.0 mm2 / 24 – 16 AWG
Enclosure IP20, Type 1
Electronic Protections
Solar Input overload, short-circuit, high voltage, reverse polarity, high temperature, nighttime reverse current
Load Output overload, short-circuit, high temperature, reverse polarity
Battery reverse polarity (no battery removal)
Battery Charging
4-Stage charging Bulk, Absorption, Float, Equalize
Temperature Compensation Coefficient -30mV/°C/12volt
Set-points Absorption, Float, Equalize, HVD
Load & Lighting Control
Low Voltage Disconnect, Low Voltage Reconnect Settings 11.4 V / 12.6 V or Custom (x2 for 24 volt systems)
Lighting Settings Dusk to Dawn
Certifications
CE, TUV Listed IEC 62109
Note: Specifications subject to change without notice.

Circuit Protection (Circuit Breakers and Fuses)

*Excerpt from Blue Sea Systems https://www.bluesea.com/support/articles/Circuit_Protection/98/DC_Circuit_Protection

Choosing an Amperage Rating – Generally, circuit protection devices are installed to protect the wiring from overheating during overloads or faults. The simplest approach for selecting a circuit protection device rating is to choose an amperage rating that is equal to or less than the current rating, ampacity of the wire. If the wire ampacity is significantly greater than the load current, as might be with small loads or with wiring of increased size to reduce voltage drop, then a range of circuit protection values between the load requirement and the wire ampacity may be acceptable. Larger ampacity values reduce the probability of nuisance failures and reduce fuse heating; smaller ampacity values provide more conservative protection for the wiring.

In some cases, a product manufacturer may recommend that a specific fuse or circuit breaker size should be used with the product. If that is the case, the wire to the product should be selected so that the wire ampacity exceeds the recommended rating, which will protect both the product and the wiring.

We recommend Enerdrive waterproof surface mount re-settable circuit breakers for performance and value;